Following on from last week where we drove a motor in one direction with the help of a simple amplifier, this week we are going to have a go at driving a servo. Those of you who read older posts in my blog will know I have done this before […]
HackSpace
21 posts
This week we will be having a play with a 74HC595, the Data sheet lists it as an 8-bit serial-in, serial or parallel-out shift register with output latches; 3-state.” In other words, you can use it to control 8 outputs at a time while only taking up a few pins […]
Using a LED and a 560 Ω in most breadboard projects means that you end up with four pins connected for two components, soldering them up like this makes them much easer to handle.
I have started designing assembles in Fusion 360 using T-Slot, a lot of head scratching on how to make use of it at arbitrary lengths in my designs… I started by making a 20mm length of T-Slot as its own model in Fusion 360; This is model has all of […]
I have spoken to Pycom support about the problems I was having updating the expansion board, and it turns out its a known issue with Mac OS 10.15 due to the security settings in the new version of Mac OS. However the expansion board should have come from the retailer […]
I have got my PCB rule business card PCBs back from JLCPCB, so now to check everything works and build one up
This work from home thing means that I am working in the home office. Time to finish typing it up. And getting all the small things put into the right boxes etc.
After my last attempt at getting MyOpenLab to work on macOS, I posted my question on the MyOpenLab Facebook group, where I was given the following response: Hello, what version of MyOpenLab, Java and OSX are you testing? You could test the most recent development version: https://myopenlab.org/…/distribution_macosx_3.12.1.zip The fail could […]
With what I learnt from making PCBs last time, I was speaking to ‘The Langster!‘ at work, when I had some thoughts about improving the SMT Stencil / shield we use to apply the solder paste, I have had another quick look at the Manchester Hack-space’s IR oven, a little […]