When doing anything more mechanical with 3d Printing, you will want to use bolts and other fixings; This is where DIN 931 comes in!
3D Printer
11 posts
Following on from my Makevember post yesterday, where I tried to make turbine blades, and Failed… I fed 6050 from SG6050 into Fusion 360 and this is what it gave me: SG6050 profile To check it wasnt it that was broken, I ran the script with the defult value of […]
I have been a bit lax on my Makevember posts; these were just quick prints I lobbed on the 3D Printer: bathtub boat (visual benchy) Duplo train joint The Duplo Train Joints are for MiniBoyGeek, the other part will appear once I have printed the rest of it.
Another boat: I was trying to dial in a 3D printer, the blobs on the hull seem to be caused by buffer under-runs from the Raspberry Pi. In the last Makevember post, there were some strange shaped Duplo links, here they are in use:
I have been back in Fusion 360 designing parts for my wind turbine: These are parts of the hub, they are the bearings 3D printed to be the size of F 6902-2RS (15x28x7 mm) bearings that are commercially available, the printer settings have been edited slightly, so I still have […]
As in my Q-Blade Post 1. I made reference to both HAWT (Horizontal Axis Wind Turbine) and VAWT (Vertical Axis Wind Turbines), A standard VAWT design has been covered by the Ultimaker Blog: There are several other designs that are more novel. One of these novel approaches is the O-Wind, […]
After the print yesterday, I wanted to know what the 100% sized eyes would look like. Having also thought a bit more; I can think of a better way of constructing the head, so that is back to CAD for a re-design. The 100% eyes seem to have printed only […]
A fair while ago Swindon Makerspace started a group project called LogoBot, a cheap, expendable and extendable easy to build robot for playing with. Even longer ago I bought a MiroBot from kick-starter, it had lived in a box, and parts of it had got damaged. Tamarisk showed me and […]
This is version one of a set of Left-hand Switches made for MiniBoyGeek’s Duplo Railway Yes there is already a version two waiting to print, with additional check rails and re-designed mechanism: You can find it on ThingiVerse here
I have been trying to design a K9 for 3D printing for a while, even using Fusion 360 getting the body design has been a stumbling block, On Facebook, there is a k-9 builders community and a link to a OneDrive account with 200 x 200 sliced STLs. I have […]