At home, I have a Raspberry Pi that I use to develop my ROV and K-9 software. Raspbian seems to have passwordless sudo, meaning you don’t have to enter the user’s password to run a command as root. I share this development machine with my wife, Tamarisk. In the interest […]
R-Pi
12 posts
BlueOS is Blue Robotics Raspberry Pi software to control ROVs, it combines the functionality required to control robots and low-cost hardware
Following on from my Makevember post yesterday, where I tried to make turbine blades, and Failed… I fed 6050 from SG6050 into Fusion 360 and this is what it gave me: SG6050 profile To check it wasnt it that was broken, I ran the script with the defult value of […]
A fair while ago Swindon Makerspace started a group project called LogoBot, a cheap, expendable and extendable easy to build robot for playing with. Even longer ago I bought a MiroBot from kick-starter, it had lived in a box, and parts of it had got damaged. Tamarisk showed me and […]
I picked up a 37 in 1 box sensor kit from china, it includes basic components and sensors, and is compatible with Arduino and Raspberry Pi The Package Included (their description): Small passive buzzer module KY-006 2-color LED module KY-011 Hit sensor module KY-031 Vibration switch module KY-002 Photo resistor […]
Most of the stuff you will need to do the electronic projects I do on this site can be got by going to Amazon (I have affiliate links), I know I have mentioned the Oomlout Starter Kit for Arduino, However I fear that this is discontinued 🙁 The Oomlout Starter […]
I found the ‘Picktor’ Pick and Place head for retrofitting on a 3D printer on Thingiverse (GitHub) As designed it uses a Nema 17 stepper motor, however I suspect that will be too big for my design. I got 3 x Nema 14 stepper motors from an old RepRap Huxley, […]
At work, I am trying to make some automated test equipment, (I also have some personal test equipment to automate as well). At work I use MS Windows 10 for my laptop, home I use macOS, and for embedded test equipment I am planning on using Raspberry Pi and Pi […]
After my last attempt at getting MyOpenLab to work on macOS, I posted my question on the MyOpenLab Facebook group, where I was given the following response: Hello, what version of MyOpenLab, Java and OSX are you testing? You could test the most recent development version: https://myopenlab.org/…/distribution_macosx_3.12.1.zip The fail could […]
I have been trying to design a K9 for 3D printing for a while, even using Fusion 360 getting the body design has been a stumbling block, On Facebook, there is a k-9 builders community and a link to a OneDrive account with 200 x 200 sliced STLs. I have […]
With what I learnt from making PCBs last time, I was speaking to ‘The Langster!‘ at work, when I had some thoughts about improving the SMT Stencil / shield we use to apply the solder paste, I have had another quick look at the Manchester Hack-space’s IR oven, a little […]
Due to PiWars course for “Lava Palava – Escape the volcanic eruption!” containing at least one speed-hump, and the obstacles in “The Temple of Doom – Go on an adventure and tackle the obstacles in your way!” are unlikely to be flat, there should be some compliance in the drive […]