K9 Button Panel… Which layout?
Bob Clough managed to get our Prusa 3D printer working again, so I am back to printing out parts of […]
Fusion 360
Using Components in Other Fusion 360 documents
In my previous posts, I got the dimensions for ISO 4017 Machine Screws and DIN 931 Bolts. In Autodesk Fusion
ISO 4017 Machine Screws and Fixings
ISO 4017 specifies the form of metric-sized hex head screws, and covers thread diameters from M1.6 up to and including M160.
DIN 931 Bolts and Fixings
When doing anything more mechanical with 3d Printing, you will want to use bolts and other fixings; This is where DIN 931 comes in!
#Makevember Post 02 – K9’s Back
Today’s Makevember There seems to be very little consensus on the arangement of the colours of the buttons on the
#Makevember Post 03 – Turbine Blades
Following on from my previous Makevember posts… This is another virtual post, I built the Wind Turbine Hub as designed
#Makevember Post 04 – Turbine Blades – Attempt number two
Following on from my Makevember post yesterday, where I tried to make turbine blades, and Failed… I fed 6050 from
#Makevember Post 25 – Random 3D printed parts
I have been back in Fusion 360 designing parts for my wind turbine: These are parts of the hub, they
How to use 80/20 (2020 T-Slot) and other extrusions in Fusion 360
I have started designing assembles in Fusion 360 using T-Slot, a lot of head scratching on how to make use
3D Print K9
I have been trying to design a K9 for 3D printing for a while, even using Fusion 360 getting the
K9 ears
After having a go at assembling the ears printed in the last post, I decided to have a go at
Battery sledge for my ROV
A beautiful print using my roll of Filamentive grey filament, this is the battery and electronics sledge for my 3d
PiWars Suspension System
Due to PiWars course for “Lava Palava – Escape the volcanic eruption!” containing at least one speed-hump, and the obstacles
PiWars Robot Traction System
I still need B to give me more design hints beyond “Tank Tracks” for the PiWars robot design. However, I
ROV Pressure Vessel end cap and feed-throughs
In my previous two posts, Pressure Vessel and the Viewport, I talked about using the software “Under Pressure” by Deepsea